Speed of Light Apparatus Fiber optics project for measuring the speed of light With Industrial Fiber Optics' Speed of Light Apparatus, measuring the speed of light is now easy and quite accurate. Such was not the case for many centuries. The famed Galileo - after he attempted to measure the speed of light with an unlikely arrangement of lanterns and flags on tall towers - decided that light must travel at infinite speed. Later, Armande Fizeau used an elaborate mechanism with mirrors, lens and a huge rotating cogwheel to determine if the speed of light was, in fact, not infinite. He got close. After many years we now know light does not travel at infinite speed, but rather 299,792.4562 meters per second in a vacuum. With the proper combination of electronics, electro-optics and fiber optics this once-difficult measurement is simple and can be conducted in any lab or classroom. All that's needed is a 60 x 100cm table, 110 VAC electrical power, oscilloscope and the Speed of Light Apparatus. To conduct the speed of light experiment, first apply 110 VAC power to the oscilloscope and Speed of Light Apparatus, then connect oscilloscope probes to apparatus test points. After calibration, the oscilloscope monitors the reference and delayed pulses, the time delay is measured and the speed of light calculated.
Features:
Adapters for 220 VAC will be furnished upon request. The optical fibers terminate in simple cinch-collet connectors for easy assembly and efficient coupling. |
Click picture above for larger image
Instruction Manual Speed of Light Apparatus Do-it-yourself Assembly Kit IF SLK |
Replacement Parts are available.