480 804 1227
You Are Here: Home > Educational Equipment > Laser > Educational Lasers > Diffraction Mosaic IF 508

Diffraction Mosaic
Simple one-piece mosaic for demonstrating Young's single- and multiple-slit diffraction experiments

The diffraction mosaic is a precision array of seven different slots/grids designed for use in performing laser double- and multiple-slit diffraction experiments. The mosaic contains four double-slits and three multiple-slit arrays on an opaque film with clear apertures. Double-slit separations range from 45 to 100 m in width. The gratings are 25, 50 and 100 lines/mm. The mosaic is inexpensive and is mounted in one easy-to-use 35mm slide holder. Includes 12-page full-color instruction guide for conducting and understanding light diffraction experiments.

  Diffraction Mosaic

Part Number: IF 508 
Price: $9.50
Experiment Guide
Quantity





LASER CLASSIFICATIONS

All manufacturers of lasers used in the United States, must conform to regulations administered by the Center for Devices and Radiological Health (CDRH), a branch of the U.S. Department of Health and Human Services. CDRH categorizes lasers as follows:

 Class 1

A laser or laser system which does not present a hazard to skin or eyes for any wavelength or exposure time. Exposure varies with wavelength. For ultraviolet, .2 to .4m exposure is less than from .8 or near IR, the exposure is < 200w. Consult CDRH regulations for specific information.

 Class 2

Any visible laser with an output less than 1 mW of power. Warning label requirements yellow caution label stating maximum output of 1 mW. Generally used as classroom lab lasers, supermarket scanners and laser pointers.

 Class 3a

Any visible laser with an output over 1 mW of power with a maximum output of 5 mW of power. Warning label requirements red danger label stating maximum output of 5 mW. Also used as classroom lab lasers, in holography, laser pointers, leveling instruments, measuring devices and alignment equipment.

 Class 3b

Any laser with an output over 5 mW of power with a maximum output of 500 mW of power and all invisible lasers with an output up to 400 mW. Warning label requirements red danger label stating maximum output. These lasers also require a key switch for operation and a 3.5-second delay when the laser is turned on. Used in many of the same applications as the Class IIIa when more power is required.

 Class 4

Any laser with an output over 500 mW of power. Warning label requirements red danger label stating maximum output. These lasers are primarily used in industrial applications such as tooling, machining, cutting and welding. Most medical laser applications also require these high-powered lasers.