(480) 804-1227
You Are Here: Home > Connectivity > POF > SMA > 51 0085

Connector, SMA 905 POF 1 mm

Aluminum bronze knurled retention nut and ferrule holder, non-conductive polymer ferrule and standard-length strain relief, 1.0/2.2 mm POF cable, RoHS compliant.


Connector, SMA 905 POF 1 mm

SMA 905 connector optimized for use with industry-standard 1.0 mm core plastic optical fiber with a 2.2 mm outside diameter jacket. Knurled retention nut for quick finger tightening and elimination of damaged drives due to over-tightening of retention nuts. Connector ferrule is a high-performance non-conductive material that prevents any EMI conducted by the connector from radiating to the sensitive detector circuit. Non-conductive ferrule also prevents any ESD discharge paths inside active devices.

Includes connector, black strain relief and silicone dust cap.

Application: Indoor industrial or data communications networks in the adverse EMI applications including Sercos

Not available until further notice

Manufacturer: Industrial Fiber Optics

Part Number: 51 0085



  Part Number: 51 0085
Price (each)

 
 1 to 0 $ 5.94 
 1 to 99 $ 5.08 
 100 to 249 $ 4.21 
 250 to 499 $ 3.89 
 500 to 999 $ 3.51 
 1,000 to 4,999 $ 3.35 
 5,000+ $ 2.98 
 
Quantity

  Structure
Ferrule Polymer, black
Ferrule Holder Aluminum Bronze 642
Retention Nut Aluminum Bronze 642
Crimp 2.5 mm hex
Epoxy Required
Termination/Polishing Polish
Number of Fibers 1
 
Unit Value
Optical Fiber Size mm 1
Jacket Diameter mm 2.2
Approximate Weight g 9.07

Performance Criteria for Acceptance
and/or
[ Test Conditions ]
Unit Value
Maximum
Rating
Storage Temperature No Physical Deterioration
[ in a Dry Atmosphere ]
° C -55 ~ 125
Operating Temperature No Deterioration in Optical Properties
[ in a Dry Atmosphere ]
° C -55 ~ 125
Optical
Properties
Typical Loss (650 nm Light)
[ 25°C 50% RH ]
dB 1.5


RoHS Certification: Yes
Manufacturer's Data Sheet
3D STEP Model